Product Blog

This contractor was able to load the truck using his own on board crane. These are adjacent rail crossing pieces, that will be installed next to the rail. The manufactured cut-away will allow the rail plates and nails to be unobstructed. These timbers are...

These ITP Rail Crossing Panels are being installed on the west coast of the USA, such a nice view to work beside! These panels are 7" thick and come in Field and Gauge, 2 fields and 1 gauge make the total kit. They are...

These specialty Rail Wheel Chocks are designed to hold a set of Rail Car Bogies. Each flanged wheel sits in a chock. Generally speaking these are used when the bogies are being repaired (Rail Car Shop) or when being stored for deployment.

Often supplied as 8" thick or 7" thick or 6" thick x 50" wide with accompanying side panels, these are fast deploy Rail Crossing Kits. Ready to drop in to place and lag down to the ties. The undercut is to clear the rail...

These are an environmentally sensible alternative to traditional creosote Rail Ties. Yellow Cedar Rail Ties will "wear out" before they rot out, and these products hold the gauge very well (gauge is the ability to hold the rail spikes in position so the track...

These are pre-drilled and shaped timbers ready for incising and treating and eventual painting to be used as Rail Crossing Posts. The holes are drilled to accept the Cross Buck

These are 6" x 10" Hem/Fir #2 and btr timbers which are being used by a Rail Service Company to install Crossings. The wedge shape is installed downward, with the 10" face upwards. The wedge shape rests against a heavy rubber extrusion which is...

These Rail Crossing Panels are going to a private Grain rail distribution point, where rail cars are shunted on rail sidings to fill and organize. The crossings will be placed so construction equipment can access a new build facility. These Crossings can be quickly...

These rail crossing timbers are 7" thickness x 10" wide x 20' long. You can see we custom saw the bottom triangle out of the pieces that are closest to the rail, so that they lay flat. Inside the "missing triangle" are the rail...

Timbers for Rail Crossings are needed in a hurry, sometimes to access across tracks for emergency repairs. We make several sizes depending on rail height (6" x 10", 7" x 10" and 8" x 10"). We undercut the bottom corners on 4 pieces to...