Main content
Product Blog
Select Category:
MOW contractor picking up Rail Crossing Kits
This contractor was able to load the truck using his own on board crane. These are adjacent rail crossing pieces, that will be installed next to the rail. The manufactured cut-away will allow the rail plates and nails to be unobstructed. These timbers are...
Timber Outrigger Pads
These timber outrigger pads are for a concrete pumping company. We have added 3/8" side poly protection because the zoom boom operators on site can get a little overzealous pushing the pads in to place, causing damage to the pad/timbers. The pads are 6"...
Plywood Outrigger Pads
These are 2-1/4" x 24" x 32" Plywood Outrigger Pads, with red edge seal, corners are nipped, no rope handles. Used for blocking by a heavy haul moving company. We can make virtually any size pad!
Timber Toby wishes you a Merry Christmas!
Merry Christmas for 2025!
Our Christmas and New Year's hours are closed Dec 24th through January 4th. Back to regular programming January 5th 2026!
Heavy Duty Air Bridge Extra Wide
This is a heavy Air Bridge for larger dimension vehicles. Extra wide, it is 16' wide. The driving surface is 176" wide (8" curbs). The bridge has 18' wide 12" x 24" sills. This is a temporary crossing, not meant for long term use....
Shipyard Special Timber Wedge with compound angles
This special shipyard wedge is very specific for a crane to position on, it has 2 different angles. It is treated with CCA treatment. The yellow steel angle iron is for the forklift to push against on site for positioning. Truly this is a...
Air Bridge for crossing utility lines
This Air Bridge was delivered to a customer in the Pacific North West for a project where the contractor needed to cross an oil pipeline. The machinery will work across the line for 6 weeks then remove the bridge. This bridge was delivered in...
Timber Wedge / Transition Mat
These are large transition mats, in this case 12" heel x 48" wide x 3" toe x 20' long, complete with a Steel Protection Plate and internal pop up lifting points. These wedges are being used to load a heavy machine onto a barge...
Tunnel Pipe Support Blocks
These inside and outside curve (different diameters) are timber support brackets to "suspend" a steel water pipe inside a cement large diameter tunnel. After everything is "hung" in the tunnel the cavity outside the steel pipe is filled with special grout. The support blocks...
Oversize Contoured Dunnage for Pipe and Pile Casings
These are Pipe Saddles for large casings (pipes/piles) that are travelling on a barge. There is a potential for rough weather and the casings can not roll around. This design is for 60" OD piles. The timbers are 12" x 12" x 120" long....
Blocking and Wedges for a Shipyard
A series of different sized Douglas Fir Blocking and Wedges, from 5" x 12" x 36" to 1-1/2" x 12" x 36". We included 1-1/2", 2", 3", 4" and 5". This will be used in a variety of functions at the Shipyard, to space/block...